NF-8508 9 in 1 Multifunctional Network Cable Tester Optical Wire Tracer Optical Fibre Power Meter NCV Function Li-ion Battery USB Charge LED Light

NF-8508 is a very fashionable and beautiful optical power line finder both in appearance and design. The large LCD screen is clear at a glance and has complete functions. It integrates nine functions,network cable continuity testing,cable scan,port flash,length measurement,poe test,QC testing,optical power meter,VFL function,NCV function.It has bright LED lighting,can solve the trouble of dark work. It's built-in 3.7V 1500mAh polymer lithium battery,charging with USB interface,convenient and durable. It is widely used in engineering wiring,equipment room maintenance,equipment update and other scenarious target cable. Specifications: Cable type: CAT5/CAT6. Voltage protection: 60 V. Battery: Type C charge Transmitter function: Continuity: wire map port RJ45, max range 300m, STP/NTP,digital model and analogue mode Cable scan: frequency 455KHz. Port flash: quickly and exactly find out the target cable port to improve work efficiency Length: ≤20M+/-1.6M,20M-100M +/-2.4M,≥100M +/-3.2M PoE: quickly identify PoE device, standard/non standard, end connection /Middle jumper/powered by 8 cores, PoE power supply NVL: 10Mw. OPM: 850/1300/1310/1490/1550/1625(wavelength). Crimping: RJ45-8 cores, min length ≥10 cm. Lower voltage warning: <3.5V +-0.1V. Power supply: 3.7 V 1500 mAh polymer lithium battery. Transmitter size: 148 x 70 x 32 mm. Receiver function: Sensitivity adjustable. Max range: 300 m. Digital model and analogue mode Max working current ≤ 300 mA. NCV Lamp. Lower voltage warning Power supply: 3.7 V 1500 mAh polymer lithium battery. Receiver size: 198 x 50 x 28 mm.

• Two scan modes selectable: AC filter /analogue mode, up to 300m.
• Measure cable (cat5/6) length accurately, the range is 2.5~200m.
• Hub blink for locating network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
• It supports to test physical status for STP, UTP lan cable and detect the crimping condition of the crystal head.
• PoE testing : identify which pins are providing power and detect how much voltage, identify which the type of PSE (at/af standard) .
• OPM&VFL: Measure 6 standard wavelengths 850/980/1300/1310/1490/ 1550/1625/1650nm , test range: -70dBm~+10dBm, 10mw red light source (Check fiber breaks, damaged)